Slider 01 Slider 02 Slider 03 Slider 04

Process Indicator with Alarms, Two Wire or Four Wire Transmitters, Four Digit Display Indicators, Manufacturer, Exporter, Supplier, Pune, Maharashtra, India

Process Indicator with Alarms, PI-100 series

The PI - 100 D series is a compact sized Process Indicator, designed to accept input from any two wire or four wire Transmitter. It has a seven segment, ½”, bright LED Display to read the Process Value in terms of Engineering Units or percent as is desired. The alarms can be set anywhere from 0% to 100 % with both High or both Low or one High and one Low configuration. The Output , 4-20 mA proportional to PV is isolated from input and power connections

ADVANTAGES :
• Compact in Size
• Field Programmable Parameters.
• Linear/ Square Root operation programmable.
• 4 Digit Display available to monitor Process parameter
• Value from -9999 to 9999.
• Isolated 4-20mAD.C. output proportional to Process Variable.

Process Indicator with Alarms, PI-100 series
• Adjustable Two Alarm Settings with various options of Operation.
• Transmitter Supply 24 Vdc suitable for
• 2 wire as well as 4 wire Transmitter.
• Serial Interface with Computer through MODBUS RTU.
 
 
TECHNICALSPECIFICATIONS :
 
INPUT
:
4-20 mAd.c
AUXILLARYOUTPUT
:
Isolated 4-20 mAd.c. proportional to process variable.
ALARM SETTINGS
:
2 Nos. on process variable with internally fixed hysteresis of 0.5%, typical.
TRANSMITTER SUPPLY
:

24 V D.C @ 100 mAsuitable to power one two-wire Or one four-wire Transmitter.

OPERATION
:
Linear or Square Root , Programmable from front key pads.
DISPLAY
:
4 full digit, 7 segment, 0.5” LED display for Process Variable to read values from -9999 to +9999 with programmable decimal point.
ACCURACY
:
±0.1 % of F.S.
KEYBOARD
:
4 Nos. of Keys for Parameter Programming.
STORAGE FACILITY
:
Program and Data is stored in the EEPROM.
OPERATING TEMP.
:
0 to 50 °C
TEMPERATURE DRIFT
:
Less than ±0.015 % / °C max of F.S. on PV display.
HUMIDITY
:
90% R. H. max non condensing.
MAINS SUPPLY
:
Universal Supply (85 V AC to 265 V AC at 50 Hz.)
MOUNTING
:
Flush Panel.
DIMENSIONS (in mm)
:
Bazel - 96(H) x 96(W)
Cutout - 92(H) x 92 (W)
Depth - 150 including terminal length.
CONSTRUCTION
:
Plastic Molded
COMMUNICATION PORT
:
RS-232 or RS-485 with MODBUS RTU PROTOCOL